Shoe Repairs And Several Other Things When I Was 7

Shoe Repairs And Several Other Things When I Was 7
My Dad repaired most of our shoes believe it or not, I can hardly believe it myself now. With 7 pairs of shoes always needing repairs I think he was quite clever to learn how to “Keep us in shoe Leather” to coin a phrase!

He bought several different sizes of cast iron cobbler’s “lasts”. Last, the old English “Laest” meaning footprint. Lasts were holding devices shaped like a human foot. I have no idea where he would have bought the shoe leather. Only that it was a beautiful creamy, shiny colour and the smell was lovely.

But I do remember our shoes turned upside down on and fitted into these lasts, my Dad cutting the leather around the shape of the shoe, and then hammering nails, into the leather shape. Sometimes we’d feel one or 2 of those nails poking through the insides of our shoes, but our dad always fixed it.

Hiking and Swimming Galas
Dad was a very outdoorsy type, unlike my mother, who was probably too busy indoors. She also enjoyed the peace and quiet when he took us off for the day!

Anyway, he often took us hiking in the mountains where we’d have a picnic of sandwiches and flasks of tea. And more often than not we went by steam train.

We loved poking our heads out of the window until our eyes hurt like mad from a blast of soot blowing back from the engine. But sore, bloodshot eyes never dampened our enthusiasm.

Dad was an avid swimmer and water polo player, and he used to take us to swimming galas, as they were called back then. He often took part in these galas. And again we always travelled by steam train.

Rowing Over To Ireland’s Eye
That’s what we did back then, we had to go by rowboat, the only way to get to Ireland’s eye, which is 15 minutes from mainland Howth. From there we could see Malahide, Lambay Island and Howth Head of course. These days you can take a Round Trip Cruise on a small cruise ship!

But we thoroughly enjoyed rowing and once there we couldn’t wait to climb the rocks, and have a swim. We picnicked and watched the friendly seals doing their thing and showing off.

Not to mention all kinds of birdlife including the Puffin.The Martello Tower was also interesting but a bit dangerous to attempt entering. I’m getting lost in the past as I write, and have to drag myself back to the present.

Fun Outings with The camera Club
Dad was also a very keen amateur photographer, and was a member of a camera Club. There were many Sunday photography outings and along with us came other kids of the members of the club.

And we always had great fun while the adults busied themselves taking photos of everything and anything, it seemed to us. Dad was so serious about his photography that he set up a dark room where he developed and printed his photographs.

All black and white at the time. He and his camera club entered many of their favourites in exhibitions throughout Europe. I’m quite proud to say that many cups and medals were won by Dad. They have been shared amongst all his grandchildren which I find quite special.

He liked taking portraits of us kids too, mostly when we were in a state of untidiness, usually during play. Dad always preferred the natural look of messy hair and clothes in the photos of his children.

Microsoft Dynamics Business Central for Manufacturing – A Viable ERP System?

Why Should we care if we can use Dynamics Business Central for Manufacturing?Given the disruption of the past year, a lot of businesses are investigating ways to work remotely and in a hybrid work environment. There are a few technologies that manufacturing companies need to use that don’t work well remotely. One of them is ERP systems. That’s why we should care about Dynamics Business Central for Manufacturing.If you are looking to replace an ERP system because you want to ensure it facilitates remote work, cloud ERP is where you need to look. My experience is almost entirely with what is often called “SMB” or Small and Medium Business manufacturers.There are not a lot of good, modern cloud based ERP systems in the mid-market / SMB space. There are even less that really support manufacturing. That means that the best cloud systems are priced out of most manufacturers budget.Oh, In case you are wondering, Microsoft defines SMB as businesses with less than 250 computers. That’s a pretty large manufacturer.What is Business Central?In the simplest terms, Business Central is the new brand name for Microsoft Dynamics NAV. In all the ways that count this cutting edge new cloud based ERP is the old Dynamics NAV reimagined in the cloud.Microsoft did not shirk on the technology either! They have a boat load of money, and they were willing to spend a lot of it on Business Central.The full name of the product is Dynamics 365 Business Central. That 365 should look familiar, because it appears on Office 365, Microsoft 365 etc…This does mean that Business Central is part of the same suite of products you might already be using for your Outlook email, Teams communication, Microsoft Word or Excel productivity tools. And yes, that is a big advantage to Microsoft. It doesn’t mean that it will work in Manufacturing however – so that remains to be seen.How does it compare with more traditional manufacturing ERP?I recently wrote a blog comparing Dynamics Business Central for manufacturing with a pretty well respected mid-market pure manufacturing ERP called Infor Visual ERP.I worked extensively with Visual ERP for almost 20 years (ironically I never sold a copy in all that time). I ran the firm that people who had trouble with the system came to for help.When I migrated my business away from Infor Visual, I investigated a lot of products. I settled on Dynamics NAV (which later became Business Central) after significant research.By 2014 we had started switching Visual ERP customers Microsoft Dynamics NAV manufacturing. There are a few small areas that Visual might do a bit better in. That is more than overcome by two main factors that make Microsoft Dynamics Business Central for manufacturing really shine.CustomizabilityDynamics NAV and now Business Central are extremely easy to program, which let us enhance it in ways you absolutely could not with Visual. It’s so easy to program that we are essentially giving away “Missing” Visual features when we sell the product.This customization let us plug any holes we found. It also allowed us to do the one thing Visual customers always cried about. We could make small, easily maintained, incremental changes. We could adjust the system to make it work better for the customer.We avoided any kind of massive programming (although in my time I’ve seen other partners who didn’t avoid the same). We focused on making really useful changes that allowed the customer to get rapid benefits. This made a huge difference to customers. It can be a game changer when a very small change saves staff hours every week.Dynamics 365 AppSource AddonsMore or less related is the existence of addons for Microsoft Dynamics products.When we first started selling Dynamics NAV for manufacturing, there was no AppSource. AppSource is like the Google Play store or Apple Apps store. It’s a place to go and rapidly (in seconds really) install addons.In the early days these addons existed, were certified by Microsoft, but did not exist in any central location. Today things are even better. With Appsource we can really enhance Dynamics Business Central for manufacturing. I mention a couple of those modules below.Wait! I have to get AddonsThere are 2 schools of thought about ERP systems. You want to get a really good ERP system with: great accounting; inventory control; purchasing and sales; CRM; scheduling; shop floor execution etc… Imagine you wanted to get a similarly priced personal item. Say you wanted to get a vehicle and a camping trailer. You went to 2 dealerships. A Ford and the other GMC.In our fake and hypothetical Ford dealer they sell their F150 truck, with a Ford Radio, Ford Tires, and a Ford brand camping trailer. This specific ford’s rims are totally custom and don’t fit other makes of tires. Nobody makes a radio that fits their dash. The trailer is OK but not the best you’ve seen. The trailer hitch is custom built for their truck. You have no choice. But wait! It’s all in one warranty so if anything goes wrong you can blame them and they have to fix it!GMC sells their big truck by itself. You can choose which tires you get, so you want Michelin tires. You can add a radio, and decide to get the more expensive but awe inspiring Bose Radio. They don’t sell trainers, so you buy an Airstream. You would never complain about GM not making their own tires or radio, and you would never want the Ford where you had no choice but to get what they sell.Why do you want an ERP that forces you to get their proprietary versions of things instead of buying the best you can afford?Out of the Box Manufacturing Features in Business CentralDynamics Business Central manufacturing capabilities are identical to what was in Microsoft Dynamics NAV manufacturing.There are a set of core modules in the Essentials edition of Business Central. These include: sales orders, inventory and purchase orders; assembly management; jons (project accounting and management); and warehouse management.Some customers use the Essentials version exclusively. It works fine depending on your mode of manufacturing (see below).Upgrading to the Premium version adds extra capabilities. You get Bills of Materials; Routings; Machine and Work Centers; Capacity Planning; Production Orders and other purely manufacturing oriented features.Premium also adds Service management, which is used in the Engineer to Order space quite frequently, but not often in regular manufacturing.Detailed Features in Manufacturing – in the Premium VersionProduction Order Management

Agile Manufacturing

Version Management

Inventory Planning

Demand Forecasting

Machine Centre Management

Capacity Planning

Finite Loading

Production Bill of Materials

Production Scheduling

Supply Planning
Modes of Manufacturing for Business CentralI tend to think of manufacturing ERP projects in terms of the mode of manufacturing being used. There are different definitions from different organizations (mainly APICS) but these are the ones I tend to see and my take on how good Business Central for manufacturing is for these modes.Engineer to Order – ETOThis is my favorite. I worked at an ETO for a few years before starting my own business. Dynamics Business Central for Manufacturing includes a really powerful project accounting module called Jobs. Since ETO manufacturers are really project manufacturers, this jobs module is a solid foundation. There are a few additional addons that I strongly recommend (including one that we created) to make the fit even better.Overall – Business Central for ETO is really good.Make to Order and Make to Stock – Production ManufacturingMake to Order and Make to Stock are usually two separate modes of manufacturing (and they are) but I combine them into one mode I call Production Manufacturing. The out of the box manufacturing modules that are part of Business Central Premium work great for these businesses. Many of them also want the addins that I list below – which are great extra features.Job ShopsJob shops tend to come in the biggest variety and tend to actually not fit that well into either ETO or Production Manufacturing. I’d want to see the Job Shop to see whether it’s more of a micro-production shop (very common – I call these “repetitive job shops”) or whether it’s more of a custom mini-project manufacturer like a light ETO.These businesses vary a lot in what they make. A food co-packer is technically a job shop. So is a welding service business, a small machine shop etc…Whatever the case, it is a good fit for Dynamics Business Central for manufacturing.Process ManufacturingProcess Manufacturing is usually related to making one of the following:

Cosmetics

Chemicals

Nutraceuticals

Pharmaceuticals

Food manufacturing
Process manufacturing needs some heavy duty addons for Business Central to work properly. This is outside my comfort zone to be honest. The regulations and batch manufacturing processes are really unique. I have a few colleagues that I send these kinds of prospects to. Those addons for Business Central are extremely good, and handle this industry very, very well.Graphics Arts ManufacturingPrint Manufacturing is it’s own sub-type, really a form of either Job Shop or Production Manufacturing depending on what they make. These businesses don’t work as well out of the box with Dynamics Business Central for Manufacturing. They usually fall into these categories.

Commercial Print (magazines, business carts, posters, flyers etc. – a real Job Shop)

Folding Cartons (think a toothpaste box, or cereal box. Can be production or Job Shop)

Flexible Packaging (these companies make the plastic bags you get consumer goods in)

Labels (could be a wine bottle label, or a shampoo bottle, or your aspirin).

Wide Format (think huge banners, giant photographs on walls in a mall etc.)
This mode of manufacturing has a really great addon for Business Central called PrintVis. PrintVis is a Print manufacturing MIS software addon that turns Business Central into arguably the best Print MIS in the market.Add-ins Recommended by MeMy team has reviewed many addon solutions since we started working with Business Central for manufacturing. Here are our top choices:InsightWorks Shop Floor Insights (SFI)This is a manufacturing execution system for collecting job costing data (time), production reporting and materials use in real time. Comes with a nifty scheduling tool also.InsightWorks Warehouse Insights (WHI)This product is my favorite wireless barcoding solution for warehouse management. It runs on most of major brands of wireless devices used in warehouses today. I think it’s a great mid-level warehouse management solution.Netronic Visual Production SchedulerFor those who need a a graphical drag and drop scheduler, Netronic is the industry standard for Business Central. Their Visual Production Scheduler is more or less for visualizing and manually editing the schedule. The Advanced Production Scheduler is more robust and will do best fit scheduling.ConclusionWe’ve taken a look at using Dynamics Business Central for manufacturing in this article. I’ve had the opportunity to oversee the implementation of this system in more than 50 companies, and so far, so good. For that SMB manufacturer with 20 employees who work in the office and 60 that work in the shop – this is a great system. We’ve got a few customers with 500+ total employees using it very successfully. We also have a few with 10 total employees, and they are able to make it work.If you are a manufacturing company that is in the small or medium market (again – less than 250 computers) looking for ERP I strongly suggest you look at Microsoft Dynamics. I can confidently say that as an ERP Dynamics Business Central for manufacturing is a great fit.

Business Capital Solutions In Canada: Accessing Proper Cash Flow & Commercial Financing

Business capital requirements in Canada often boil down to some basic truths the business owner/financial mgr/entrepreneur needs to address when it comes to financing for businesses.

One of those truths? Knowing the true state of their financial condition and what financing they do and don’t qualify for when it comes to meeting commercial lending requirements in Canadian business.

Business Loans In Canada

Whether you are smaller or start-up firm looking for information on how to get a business loan or a larger established firm looking for growth financing or acquisition opportunities we’re highlighting 3 mistakes that commercial loan seekers like your company need to avoid making when addressing, sourcing and negotiating your cash flow / working capital and commercial financing needs.

1. Understand the true condition of your company finances – These are almost always successful addressed when you spend time on your financials and understand how your financial statements reflect your access to commercial loans & business credit in general

2. Ensure you have a plan in place for sales growth and financial needs as it relates to commercial financing

3. Understand that actual hard facts about cash flow which is, of course, the lifeblood of your company

Can you honestly answer or feel positive about all those 3 points. If so, pass Go and collect $ 100.00!

A good way to address your company’s finance plans is to ensure you understand growth finance solutions, as well as how to manage in a downturn – i.e. not growing, losing money, etc; It’s never fun to fund yourself in an economic or industry downturn such as the COVID pandemic of 2020!

When we talk to clients of new or established businesses it seems they are almost always talking about sales, so the ability to understand and focus on the differences in their profits and cash fluctuations is key.

How do cash flow and sales plans and projections affect the type of financing you require? For one thing sales growth usually starts out by consuming your cash, not generating it. A poor finance plan will drag your business down and addressing financing simply gets tougher and tougher.

Three basics always emerge when it comes to your search for the right business capital and financing.

1. The amount of financing you need

2. The type of financing (debt/cash flow/asset monetization) The business loan interest rate will be dramatically affected by whether you choose traditional or alternative financing solutions. Private business loans in Canada come from non regulated commercial finance companies most often known as ‘ alternative lenders ‘. These lenders are typically highly specialized in one ‘ niche ‘ of business financing and may be Canadian firms or branches of U.S. banks and non-bank lenders

3. How the financing is structured to be manageable with your day to day operations

What Finance Company In Canada Can Meet Your Borrowing Needs & Why Is Capital Important In Business

Let’s identify and break down key financings your firm should know about and understand if they are applicable and achievable to your business. They include:

A/R Financing / Factoring / Confidential Receivable Finance

Inventory finance / floor planning / retail inventory

Working Capital term loans

Unsecured cash flow loans

Merchant working capital loans/advances – these loans are geared toward short term cash needs and are typically one year in duration. Loan amounts are typically 15-20% of your annual sales revenues.

Royalty finance

Asset based non bank business lines of credit

Tax credit financing (SR&ED bridge loans)

Equipment Leasing / Sale leasebacks – Equipment financing in Canada is used by almost 80% of all companies looking to acquire new, and used, assets.

Govt Guaranteed Small Business Loan program – Government Loans in Canada are sometimes referred to as ‘ SBL’, aka Note: BDC Finance solutions are available from this Canadian non-bricks and morter crown corporation. A small business loan via the government-guaranteed loan program comes with true flexibility around term loan duration, market rates, no pre payment penalties, and of course the low personal guarantee that is required by borrowers. These two ‘ government ‘ loan solutions are often perfect for financing a new business.

If you’re focused on not making mistakes in your business finance needs and want to capitalize on the solutions your competitors are probably already using seek out and speak to a trusted, credible and experienced Canadian business financing advisor who can assist you with your cash flow and commercial financing needs.

Stan has had a successful career with some of the world’s largest and most successful corporations.

His employers over the last 25 years were, ASHLAND OIL, ( 1977-1980) DIGITAL EQUIPMENT CORPORATION, ( 1980-1990) ) CABLE & WIRELESS PLC,( 1991 -1993) ) AND HEWLETT PACKARD ( 1994-2004 ) In 2004 Stan founded 7 PARK AVENUE FINANCIAL – He is an expert in Canadian Business Financing.